Calibration Of Venturimeter

Home>Fluid Mechanics Laboratory Equipment>Calibration Of Venturimeter
Calibration Of Venturimeter

Product Description:

SV Techncocrats India’s Calibration of a Venturimeter involves determining its discharge coefficient (Cd), which accounts for real-world deviations from ideal flow conditions. This process ensures accurate flow rate measurements when using the Venturimeter.

Here is a step-by-step guide to calibrating a Venturimeter:
Components and Features of the Venturimeter

1. Converging Section: Narrows the flow path, increasing fluid velocity.
2. Throat: The narrowest part of the Venturimeter, where velocity is highest and pressure is lowest.
3. Diverging Section: Gradually widens the flow path, reducing fluid velocity.
4. Pressure Taps: Located at the inlet and throat to measure pressure differences.
5. Manometer or Pressure Gauges: Measure the pressure at different sections.
6. Flow Meter: Used as a reference to measure the actual flow rate during calibration.
7. Collecting Tank: Used for volumetric measurements of the discharged fluid.

Description

Calibration Procedure

1. Setup:

• Install the Venturimeter in the pipeline.
• Connect the pressure taps at the inlet and throat to a manometer or pressure gauges.
• Ensure all connections are secure and leak-free.

2. Initial Measurements:

• Start the pump to establish a steady flow through the Venturimeter.
• Adjust the flow rate to a desired value using control valves.
• Record the differential pressure (?P\Delta P?P) between the inlet and throat using the manometer or pressure gauges.

3. Flow Rate Measurement:

• Use a flow meter to measure the actual flow rate (Q_actual).
• Alternatively, collect the discharged fluid in a collecting tank over a measured period to calculate the flow rate volumetrically.